The Trend Wind Submersible LED Light is perfect for your backyard pool party. It can turn your hot tub into a beautiful work of art. Instead of an eyesore that you want to hide, it will be a feature with lovely lighting.
Colored lights matching the décor can make your backyard truly magical. These lights are reasonably priced, last a long time, and can be reused. You can even bring these indoors.
Features of the Trend Wind Submersible LED Light
- Remote controlled
- Completely waterproof
- Battery powered
- Sixteen colors
Ease of Operation
First, you’ll need to get yourself some batteries. This lighted disc takes 3 triple A batteries. You can easily grab some at the store. In fact, you should start with fresh batteries for your party.
Don’t just grab some extras you have lying around in the junk drawer. Once the batteries are in place, twist the cap tightly.
That’s all there is to the lighted disc basically. The lights are controlled by remote, which we’ll cover in a moment. If there’s ever a problem with the light being weak, it’s likely to be a weak battery.
Remove the old batteries and replace with new ones. It’s worth getting good batteries that will last a long time.
With the remote, you don’t have to dig around in the water to change the colors. There are dynamic color patterns as well as brightness that can be remote controlled, too.
The RGB lights give you 16 colored light combinations. From red to yellow to green to purple, there are 16 colors for your décor. Along with the colors, there’s a simple white that can be used, too.
The remote controls a dynamic color changing effect, too. The lights can flash, strobe, fade, or stay smooth. They have two buttons to control the brightness of the light, too.
You could layer the lights and colors in the backyard depending on where you place the lights. We recommend you buy more than one LED light.
There’s a rubber sealing ring to keep water from entering the light. It’s rated for full submersion under water, but it’s best to be very careful with the seal. That’s what keeps water from entering.
The light has a small iron plate in it. You can drop this light into deep water or let it float by removing the plate.
We’d recommend testing to see which way gives you the desired effect when decorating the backyard. It’s worth experimenting with the lighted effects as well as the colors, too.
This disc takes common batteries, and it also runs for a very long time. Some lights have the ability to run an hour or two, but this LED light can work for up to 12 hours.
Imagine these lights shimmering on the surface of your hot tub or spa. They could be used as lights when there’s no party going on, too. They’ll run for a very long time, but you have to remember to shut them off at the end of the night.
Pool Parties – We suggest that you test a few of these on the surface of the hot tub. They’re great around a fountain, on the underside of a deck railing, or on the table as part of a centerpiece.
Backyard Wedding – While these have more than one color, they can be set to white for a backyard wedding. They can be added to the vases filled with water and flowers. There’s also a lovely pink or light purple that might be appropriate for the event.
Summer Celebrations – Red, white, and blue for the 4th of July in the US wouldn’t be complete without some appropriate lighting.
Indoors – Inside vases, indoor fountains, aquariums, or in the bathtub. These lights can be useful and fun anywhere you can imagine. Your kids will love them. Some people use them inside without placing them in water at all.
Frequently Asked Questions
How do you remove the iron plate?
The iron plate is more like a disc inside the unit that can be pried off to keep it from sinking. This will allow the LED light to float on top of the water.
Can these be used in hot water?
That’s a great question because if you want to use them in the hot tub, they have to be suitable for all temperatures. This light can definitely handle any temperature. Just make sure the ring is super tight, so no water gets into the case.
How do these get fixed upside down under a railing or other object?
If you’re using these on a slick surface, we recommend that you use a suction cup that can be attached to the bottom of the light. You could use tape or other adhesive depending on the material you’re attaching it to.
The Trend Wind Submersible LED Light can light many locations for events or everyday use. If you buy one, you’ll wish that you’d purchased more for your outdoor space.